skip to Main Content

Predicting the Shear Capacity of Reinforced Concrete Slabs subjected to Concentrated Loads close to Supports with the Modified Bond Model

For IABSE 2014, I published the first paper about the theoretical work about the Modified Bond Model from my dissertation.

The abstract of the paper is:

The shear problem is typically studied by testing small, heavily reinforced, slender beams subjected to concentrated loads, resulting in a beam shear failure, or by testing slab-column connections, resulting in a punching shear failure. Slabs subjected to concentrated loads close to supports, as occurring when truck loads are placed on slab bridges, are much less studied. For this purpose, the Bond Model for concentric punching shear was studied at first. Then, modifications were made, resulting in the Modified Bond Model. The Modified Bond Model takes into account the enhanced capacity resulting from the direct strut that forms between the load and the support. Moreover, the Modified Bond Model is able to deal with moment changes between the support and the span, as occurs near continuous supports, and can take into account the reduction in capacity when the load is placed near to the edge. The resulting Modified Bond Model is compared to the results of experiments that were carried out at the Stevin laboratory. As compared to the Eurocodes (NEN-EN 1992-1-1:2005) and the ACI code (ACI 318-11), the Modified Bond Model leads to a better prediction.

Share with your peers!
This Post Has 0 Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

Back To Top

Free Templates for your Research

Sign up here to get access to worksheets for your research that help you have more efficient meetings, reflect on your work, and plan your month. Suitable for anyone from Master’s thesis students to full professors!